Perfectly perfect half square triangles and hourglass units (a tutorial)


When I made my Swooning for Baby Charlie* quilt I decided it was time: time to get those half square triangles (HSTs) just right.

(*Shout out to baby Charlie’s great grandmother by the way! Apparently she’s a big fan of my blog. You just cannot imagine how happy it made me to hear that.)

I slowed down and took the time to figure out what works for me, and now I’m passing along what I learned to you.

If you’re having trouble with your HSTs ending up too small, this one’s for you!

1.  The math.  Determine what size you need your HST to be and add 3/4 of an inch. I like to think in terms of the unfinished measurement: the size of the HST when it is a unit that is not yet sewn into your project. It will finish 1/2 an inch smaller on both sides once it is sewn into the project, but for now let’s keep it simple by just thinking about the size it needs to be when it is a lone unit.

For example, the project I’m working on (writing my first pattern, in fact!) requires me to attach HSTs to 3 1/4 inch strips so I need my HSTs to measure 3 1/4 inches. Adding 3/4 of an inch means I need to cut 4 inch squares.

2.  Cutting.  Cut a square from each of your fabrics to the size you determined in the step above.


3.  Drawing.  I use the Fons & Porter quarter inch seam marker for this, but I’ll show you how to do it without one too.

If you have the seam marker, draw 2 lines- each a quarter inch from the diagonal of your square on the wrong side of the fabric. If one of your fabrics is a lighter color, it’ll be easier to see your pencil line on that one. A mechanical pencil is the best marking tool for this job.


If you don’t have the seam marker, draw one line down the diagonal of the square.


4.  Sewing.  The directions that come with the ruler say to sew on the lines you just drew. Don’t do that! Sew just slightly to the side of that line. This is called sewing with a scant 1/4 inch seam. It takes into account that tiny line of fabric you lose when you fold the fabric over and press it after sewing. In our case, the over-cutting actually makes this less important because we are going to have a fair amount of wiggle room. But sewing with a scant 1/4 inch is still a good thing to practice.



If you are only using a center line, sew a scant 1/4 inch on either side of the center line.


Sew slowly here. You are sewing on the bias, where the fabric is weakest. If you zoom your machine too quickly the fabric will stretch.

5.  Trimming. Cut and press your new baby HSTs.


I like to finger press them open before pressing them with the iron, otherwise they don’t always open all the way.


Yes I need a new ironing board cover. And a manicure.

Use the 45 degree marking on your ruler to “square up” your triangles to the right size. It was a bit of an “ah ha” moment for me when I realized that a triangle can be trimmed to any size as long as you keep the ruler’s 45 degree line right on the triangle’s 45 degree line. That means if you are following a pattern, when it comes to HSTs you don’t have to be nervous about changing the cutting directions a bit to allow you the extra you need for trimming. You can cut the size you want to cut!




This is a little easier if you have these cute little square rulers, but you can certainly use the 45 degree angle of any cutting ruler.


Now you have a perfectly perfect HST and you can make just about 75% of all quilt patterns!

A word about the waste. Ok, so those little tiny strips of fabric can be pretty hard to part with when the fabric is this cute. But it’s worth it! The main reason you want those little edges gone is because you’ve just sewn on the bias. Any time you cut or sew diagonally across fabric (even if you go slowly) it stretches and weakens. Those edges were manhandled by your sewing machine’s feed dogs. It’s best to part with them in favor of a more accurate quilt top.

6.  Hourglassing.  (I just invented a new verb. “Mommy’s hourglassing, I’ll be there in a minute.”) If you need hourglasses instead of HSTs the process is very similar.

The math: add an inch to the size of the unit you want. Just like the HSTs, you can always trim an hourglass smaller as long as you watch the 45 degree angles and the center point.

I want my hourglass unit to measure 3 1/4 inches. Unfortunately, we cannot use the HSTs we just made because those will end up too small. We need to cut our squares 4 1/4 inches this time and then make 2 HSTs using the method described above (stopping prior to trimming). Before trimming we need to diagonally cut the HST as shown below and then join the pieces into hourglasses. One HST will yield 2 hourglasses.



This is a good place to mention that when you’re joining things like this you should make sure the 2 seams are pressed in opposite directions and then “nest” the seams together as shown below. This is how you get perfectly aligned points. A pin wouldn’t hurt but I personally don’t use them for this.


To trim, find the center measurement of your hourglass and line up your ruler there. Our hourglass makes this kind of tricky, but I want to keep it real. Half of 3 1/4 is 1.625. Eyeball it! It’ll be fine. Just make sure you trim about the same amount from each side so your center point stays centered.



And there you have a nicely square 3 1/4 inch hourglass unit with 4 clean and strong sides.

Please feel free to contact me with questions about this tutorial! I hope it helps.

WIP Week: Swooning for baby “X”


I can’t say who this is for juuuust in case his Mommy reads this. But in my mind the “x” in the name is a cuter name that I might get a chance to share here sometime soon.


This pattern (called Swoon) from Camille Roskelley (co-designer of the great fabric line Happy Go Lucky) has  taken the internet quilting world by storm. I’ve heard it has a crazy popular Flickr group but I’m still trying to figure the whole Flickr thing out. Any tips?

Camille has a great Craftsy class that features this pattern! It’s another favorite of mine. She’s so cute.

I changed the pattern just a bit by adding the stripes because I wanted the quilt to be rectangular. It just makes sense to me that quilts should be rectangular because beds are rectangular! This quilt is also the beginning of the end of “crib size” quilts for me. My kids have soared past baby stage so quickly that I realized that crib size just isn’t practical. A few more inches in each direction and you’ve got a proper toddler size that they can use for much much longer! This quilt is about 53 by 78 and it really wasn’t that much more work. I hope baby X sleeps with it until it falls apart! I always tell people it would be an honor if the baby poops on my quilt. I want my quilts to be loved and used and abused!

Here’s a closeup so you can judge whether my seams match up! I think they’re actually pretty good. I sure tried hard. I had a bit of a breakthrough with my half square triangles (HSTs). The patterns calls for the method where you draw a line and sew a 1/4 in on either side of it. Mine always always turned out a tiny bit small with that method, even using the Fons & Porter quarter inch marking tool. So this time I sewed just to the side of the line and they were much better! I was pretty excited. My flying geese still need work I’m afraid. I need to do a whole quilt of just flying geese to practice. It’d be fun to do a post on trial and error with flying geese and HSTs.


This quilt features 3 different blue fabrics from my first fabric designer love, Denyse Schmidt. I still snatch her fabrics up regularly and find them to be very useful stash builders.

This quilt actually only just barely qualifies as a WIP because it is so nearly done! Just about 12 more inches of binding to sew while watching tv tonight. I can’t believe I used to dread the binding! It’s one of my favorite steps now.


Once it’s bound I will wash it (cold water with a color catcher) before it gets sent off to surprise baby X’s Mommy. I’ve started washing all my quilts before sending them out so the receiver isn’t surprised by the change in appearance that occurs after the first wash (referred to as “quilt crinkle”). How do you guys feel about quilt crinkle? I’ve tried to like it but I’ll admit that I don’t. There’s just something about a nice, crisply starched unwashed quilt! I recently learned that quilts are never washed before photographing for publication. That makes sense but it also sets us average home quilters up for disappointment when our quilts don’t look like their pictures!

Come back tomorrow to see the 3 (yes, 3!) long-term english paper piecing projects I’m working on!