Tutorial: Cut a yard of fabric in a flash


Have you ever done a swap?

There are all kinds of them out there! People swap fabric (of course) but also finished blocks and even finished projects (usually small projects like mini quilts, bags, etc).

I recently joined an Anna Maria Horner charm square swap on Flickr (it’s full now but I’m willing to bet there will be another round soon). We each send 2 sets of 56 charm squares (5 inches) of 2 fabrics and get 2 sets of 56 different fabrics back.

I ordered some of AMH’s 2 new lines Dowry and True Colors.


(BTW, don’t be confused if you search for True Colors at your go-to fabric sources and find multiple lines coming up under that name. It’s actually a new collection of several lines by several Free Spirit designers- all basics intended to blend with each designers’ individual typical palettes).

When I made this order I ordered an extra yard of 4 different prints for my contribution to the swap (I signed up for 2 slots, so I have to send 4 sets of 56 charms).

What’s fabulous about this is that it’s incredibly fast to cut 56 charm squares from one yard of fabric. It would take way longer to go through your stash and cut 56 charms from 56 different fabrics (if you even have that many!).

As I was cutting these charms yesterday I was thinking about my cutting tutorial from my Your 1st Quilt series. I didn’t discuss cutting multiple pieces at a time because I honestly don’t think that’s a good idea for beginners. But just in case some of you might benefit, I thought I’d do a really quick tutorial on how I cut a yard of fabric if I’m fortunate enough to need a lot of one particular size cut.

I should give credit to Camille Roskelley’s excellent first Craftsy class. I do it a little differently, but this is definitely inspired by her method and I highly recommend her class. She has a second class out now that I’ll definitely be checking out.

A yard of fabric in a flash:

1. As always, starch and press your fabric first.

2. Now hold your fabric selvedge to selvedge so that it hangs straight and place it on your cutting board. (I explain this fully in my introductory cutting tutorial here.)

3. Line up a line of your ruler with the bottom, folded edge of the fabric. Create a straight, fresh edge on one side.

DSC06938 DSC06941

4. Working from your new fresh edge, cut into 5-inch strips. To line up your ruler with the folded edge you’ll have to rotate the board or go to the other side of your table.

DSC06957 DSC06946

Each time make sure you are getting a good 90-degree angle. Sometimes you may need to create a new, fresh edge if that angle somehow gets off.

5. This is where it gets fancy! Carefully lay out as many 5-inch strips as your cutting board and ruler can handle. I have a large board but only a 24 inch ruler. My setup can handle 4 strips at a time.


You’ll line the strips up using the lines of the board, but use your ruler to measure and cut.

5. Create fresh edges again by cutting off the selvedges.

DSC06979 DSC06989

Then rotate the board and cut your strips into squares.


Frequently double check for 90 degree angles on all corners.

If you are having trouble with the ruler slipping at the end, try pausing to move your hand higher up the ruler. I usually move my hand half way through a long cut like this. You may even want to move it twice if your ruler is particularly wild.


When you get to the end you’ll have 56 charm squares and some small scraps left.



I do not like to stack multiple strips, even though that would make this even faster. I have not had good results when I’ve tried that, so I don’t do it.

Accuracy is more important than speed, so check your accuracy often. If you are not getting good results, you may need to change your cutting blade or simply try different methods until you find one that works for you. This is the method that works for me!

Your 1st quilt: starching & cutting

Today our goal is to cut 9 perfect 5-inch squares that we can sew together in the next tutorial. I chose a modern, Christmasy vibe for my quilt so I can use it as a decoration when the time comes!



Before we can even begin, I’m forced to acknowledge a major quilting controversy: pre-washing vs. not. (I know! Controversy already. And this isn’t the end of it. Just wait until we get to the great “pressing to the side vs. pressing open” debate. That one’s bound to get a little heated.)

Simply put, I don’t pre-wash while others do. The concern those “others” have is that the fabric might bleed and destroy your work of art. To me it seems like an unnecessary extra step. It’s also sort of impossible to pre-wash the smaller precuts because it causes too much fraying. I address the fabric bleeding concern as follows:

  • I only use high-quality fabrics and thread for my quilts
  • I wash my quilts in cold water
  • I use Scotch color catchers in the laundry

With those precautions in place I haven’t had any trouble with bleeding. But if you decide that you are going to be a pre-washer, this is the time to do it!

Ok, I’m glad we got that controversy out of the way.

Unless you purchased precuts for this project, your fabric probably looks something like this:


It’s hard to cut creased fabric accurately so the first step will be to iron it. I like to starch my fabric at this point because the starch removes the stubborn creases. Some people use steam for the same reason. I prefer starch because the starch causes the fabric to hold its shape at later stages of the quilting process.

If you use starch or steam, be gentle! When the fabric is wet it’s fragile and easily stretches out of shape. Quilters often like to say that we “press” our fabric, we don’t “iron” it: its a pressing down motion rather than a pushing across motion.

Now that we have nicely starched and ironed fabric, we need to understand a few things before we start cutting.

A few quick terms:

  • Selvedge means the tough 1/2 inch ends of the fabric (sometimes printed with information about the fabric).DSC05884
  • Raw or cut edge means the edge of the fabric where the fabric is cut off the bolt.
  • Bias means at an angle. When you cut across fabric at any angle except exactly 90 or 180 degrees to the selvedge, you create a bias edge. Bias edges are despised in quilting because they are stretchy and lose their shape from being handled or sewn. We work hard to avoid them if possible.
  • Straight of grain means horizontal or vertical to the selvedge edge of the fabric (NOT at an angle). If you cut your fabric perfectly on the straight of grain your edges will hold their shape better. To get our perfect 5 inch squares, we are going to carefully avoid creating any bias edges by cutting on the straight of grain.
  • WOF (width of fabric) is the distance from selvedge to selvedge, which is usually about 44 inches for quilting fabric.

Cutting is a little different depending on the size and shape of the fabric. I will demonstrate cutting from a fat quarter first.DSC05900

Lay your fat quarter on your mat, lining up the selvedge with one of the horizontal lines. We are always going to cut either at a 90 degree angle or parallel to that selvedge, thereby avoiding creating any bias edges.

But first we need a nice, straight edge to work from. Fat quarters and yardage rarely have straight edges when they come to you. You have to create one.


Place the ruler on top of the fabric and line up the lines on the ruler with the lines on the mat. Your goal is to create a straight edge without wasting any more fabric than necessary.


Firmly press down on the ruler with your hand and cut the edge of the fabric with the rotary cutter.

(It goes without saying that a rotary cutter is sharp and dangerous right? Be extremely careful.)


Now we have a nice, straight edge to work from.


Flip the fabric so that the selvedge is now at the top of the mat and position the ruler so that the 5-inch line is exactly straight against the line we just cut. Now you can cut your 5 inch strip.


Next we lay our strip horizontally on the mat and trim off the selvedge, carefully aligning the top and bottom of the strip with 2 lines of the ruler.


Rotate the strip again so that the freshly cut edge is to the left.


Place the rule 5 inches over the fabric and cut your square.


Keep in mind that a shape could have four perfectly 5-inch sides without actually being truly square (if you remember your geometry, that would be a parallelogram). To avoid this, always watch the corners of your shape on the ruler to be sure they are 90 degrees.


Hey! Look at that – a perfect 5-inch square.

Cutting from a shape bigger than your cutting mat is just a little different.

The first thing you’ll do is fold the fabric selvedge to selvedge, making sure that the folded edge hangs straight. If it hangs like this you need to slide the selvedges an inch or two until the fabric hangs correctly and that bubble goes away:


Now put the fabric down on your mat and line up the folded edge with one of the horizontal lines on your mat.


Now line up the ruler with the folded edge and the lines of the mat and make your first cut. Just like with the fat quarter, you are only trying to get a straight edge. Don’t cut more fabric than you need to.

Next, flip the fabric so the freshly cut side is to the left and cut your 5-inch strip.


Note that at this point, since I know the edge I just cut is nice and straight and square, I’m not even using the lines on my mat. I’m simply measuring 5 inches from the edge with my ruler to make my cut. However, any time you are cutting a shape that is larger than your ruler you will not be able to use the ruler as your source of measure. In that case you have to be extra careful to line the fabric up using the mat only.


As before, cut the squares from the strip.


This time you end up with 2 squares because the fabric is folded over. I don’t actually need 2 for this project but in most projects you’d need at least 2 if not many, many more!

Some people layer their fabric up and cut several layers at once. I don’t do that very often because I haven’t had accurate results. Accuracy is incredibly important at this stage. You will be depending on these cut lines to show you where to sew. If your cut line is not accurate, your sewing line will not be accurate either.

One final comment about cutting from yardage: I always try to preserve the WOF as long as possible. For instance, when I was cutting the 5 inch strip above, I intentionally didn’t cut parallel to the folded edge because I wanted to preserve the WOF. In the photographs I’m working with a half yard, which measures 18 by 44. After I cut a 5-inch strip the fabric measures 13 by 44. This is preferable to a piece of fabric measuring 18 by 39 because long pieces come in handy for borders and binding.

Ok, now get cutting because it’s almost time to actually sew something!

(In case you haven’t noticed, I added a “Your 1st quilt” tab at the top of my blog so you can always find these tutorials quickly in the future).